بازدیدکننده گرامی این صفحه در حال بروزرسانی و بازطراحی میباشد لذا ممکن است در حال حاضر برخی از مطالب قابل رویت نباشند
- Operating mechanism: servo electromechanical
- Computerized control system, capable of adjusting the torsion speed, drawing graphs, graph analyzing, comparing several graphs with each other
- Equipped with different 3-chuck grips with hydraulic and manual clamping to clamp wires and specimens with different hardness and cross sections
- Single zone furnace with heat capacity up to 1000ºC with the capability of rail displacement
- Equipped with special grips and adaptors made of super alloy (up to 980ºC)
- Temperature uniformity control, ±0.2C
- Temperature measurement sensors mounted on the test piece
- Capability of changing and controlling speed up to max 30rpm by AC servo motor and driver
- Equipped with a transducer to measure the torque (accuracy, 1% of the reading)
- Digital angle meter, accuracy 0.001º
- Equipped with automatic turn-off system after the specimen rupture
- Capable of applying cyclic loads with pertinent hysteresis graph
- Moving system for moving grips with specific bearings (almost with no friction)
- Having a proper mechanism for applying axial force to the specimen
- Equipped with required accessories to test and calibrate the torque meter
- Software calibration of torque
The machine is designed to test wire torsional strength, test is carried out with maximum speed of 30rpm (3.14Rad/sec, or 10800degree/min) and minimum speed of 0.01rpm (0.001rad/sec, or 3.6degree/min) both in cyclic (i.e. 10 rounds CW and 10 rounds CCW automatically) and torsional mode. The machine operating mechanism is servo electromechanical using a gearbox, with a torque meter (accuracy better than 1% of the reading in a range of 2%-100% of the machine capacity), as well as an angle meter, accuracy 0.001º. The controlling system is of computerized type through serial port RS-232 by means of DSP technology regardless of the PC type. User-friendly software controls and draws torque-speed curves on PC and presents pertinent reports. Other capabilities are recording, recalling, and printing the test values, defining the test speed, specimen dimension, points of maximum torque, rupture torque, as well as torque at yield point on the graph. An individual control keyboard with JOG keys are mounted on the machine for easy operation and adjusting the test piece and grip rotation. A protective door or shield can be mounted on the machine for more safety. The system has a safety laser scanner that provides safeguarding and personnel protection, it stops the machine operation if any object (operator’s hand and arm, or even wrench) gets close to or left on the chuck. To carry out hot tests, a single zone furnace -heat capacity 1000ºC- with supports and brackets with 2º clearance to be mounted on the machine via slots is used (annular furnace, inner diameter 50mm and length 150mm). The furnace is equipped with thermocouples K, flexi type class “A” (display resolution 0.1º) as well as control system and PID digital control display. Moreover, the machine has accessories for torsional torque calibration; these accessories are rendered to the buyer for functional verification.
The machine is designed to carry out tests and QC of various wires, by which their functions under torsional loads are determined, such as:
•Quality control of Copper wires
•Testing the high strength wires
•Testing the strings of cables and wire ropes
•Quality control of wires in power industry and power transmission lines
You must be logged in to post a review.
STW-300E Catalog
قبل از ادامه دادن، مطمئن شوید که نام محصول را کپی کردهاید
برای دسترسی به این فرم لازم است به حساب کاربری خود در سایت سنتام وارد شوید
سازنده:
شرکت طراحی مهندسی سنتام
استعلام قیمت
درخواست مشاوره
دانلود کاتالوگ
شرایط تحویل حضوری
شرایط تحویل کالا در محل کارخانه
جزییات بیشتر
شرایط ارسال دستگاه
شرایط ارسال دستگاه و حمل آن
جزییات بیشتر
متن آزمایشی
متن آزمایشی
جزییات بیشتر
گارانتی دستگاه
شرایط خدمات پس از فروش
جزییات بیشتر
جزییات بیشتر
- Operating mechanism: servo electromechanical
- Computerized control system, capable of adjusting the torsion speed, drawing graphs, graph analyzing, comparing several graphs with each other
- Equipped with different 3-chuck grips with hydraulic and manual clamping to clamp wires and specimens with different hardness and cross sections
- Single zone furnace with heat capacity up to 1000ºC with the capability of rail displacement
- Equipped with special grips and adaptors made of super alloy (up to 980ºC)
- Temperature uniformity control, ±0.2C
- Temperature measurement sensors mounted on the test piece
- Capability of changing and controlling speed up to max 30rpm by AC servo motor and driver
- Equipped with a transducer to measure the torque (accuracy, 1% of the reading)
- Digital angle meter, accuracy 0.001º
- Equipped with automatic turn-off system after the specimen rupture
- Capable of applying cyclic loads with pertinent hysteresis graph
- Moving system for moving grips with specific bearings (almost with no friction)
- Having a proper mechanism for applying axial force to the specimen
- Equipped with required accessories to test and calibrate the torque meter
- Software calibration of torque
The machine is designed to test wire torsional strength, test is carried out with maximum speed of 30rpm (3.14Rad/sec, or 10800degree/min) and minimum speed of 0.01rpm (0.001rad/sec, or 3.6degree/min) both in cyclic (i.e. 10 rounds CW and 10 rounds CCW automatically) and torsional mode. The machine operating mechanism is servo electromechanical using a gearbox, with a torque meter (accuracy better than 1% of the reading in a range of 2%-100% of the machine capacity), as well as an angle meter, accuracy 0.001º. The controlling system is of computerized type through serial port RS-232 by means of DSP technology regardless of the PC type. User-friendly software controls and draws torque-speed curves on PC and presents pertinent reports. Other capabilities are recording, recalling, and printing the test values, defining the test speed, specimen dimension, points of maximum torque, rupture torque, as well as torque at yield point on the graph. An individual control keyboard with JOG keys are mounted on the machine for easy operation and adjusting the test piece and grip rotation. A protective door or shield can be mounted on the machine for more safety. The system has a safety laser scanner that provides safeguarding and personnel protection, it stops the machine operation if any object (operator’s hand and arm, or even wrench) gets close to or left on the chuck. To carry out hot tests, a single zone furnace -heat capacity 1000ºC- with supports and brackets with 2º clearance to be mounted on the machine via slots is used (annular furnace, inner diameter 50mm and length 150mm). The furnace is equipped with thermocouples K, flexi type class “A” (display resolution 0.1º) as well as control system and PID digital control display. Moreover, the machine has accessories for torsional torque calibration; these accessories are rendered to the buyer for functional verification.
Reviews
There are no reviews yet.