According to ASTM D1238 and ISO 1133 standards, SMF-350 has a precision cylinder, piston and various dies which are manufactured accurately in terms of dimensions, roughness and hardness (there are three types of dies: height, 25.4mm and hole precision -2.095±0.0051mm; height 8mm and hole precision 2.095±0.0051mm, height 4±0.012mm 1.048±0.005mm). all test parameters (temperature, loading value, cutting time) are controlled by a PID controller via a touch screen HMI color display which are used respectively to check and regulate the maximum temperature 350ºC and resolution 0.1ºC. Since the automatic machine has a wide range of standard weights (A series weights: 1.2Kg, 2.16Kg, 3.8Kg, 5Kg; and B series weights: 10Kg, 12.5Kg, and 21.6Kg) the operator can select any standard test conditions (temperature and weight) to carry out wide range of testing. An enhanced cut off device permits the machine to collect accurate portions over a time tolerance (+0.02 sec); this is done by means of a touch screen HMI color display over time (seconds and minutes). The cut off device eliminates the cutting errors compared to manual mode, thus the test result would be so accurate. Dies should be made of tungsten carbide. To control the size of the hole, a go no-go gauge is used. Other accessories are: cleansing tools including funnel, mandrel, drilling machine, cutting blade, cotton glove, Allen box, etc.