بازدیدکننده گرامی این صفحه در حال بروزرسانی و بازطراحی میباشد لذا ممکن است در حال حاضر برخی از مطالب قابل رویت نباشند
- Design as per ASTM A370, E8M standards
- Machine efficiency as per ASTM E10 standard
- Servo mechanical operating mechanism with high precision ball screw and load cell
- Capability of selecting type of test such as compression, cyclic, step, and creep tests
- Load application capacity, 100Kgf, accuracy class 0.5
- Brinell indenter can be tested for hardness test
- Equipped with digital non-contact magnetic extensometer (to read the exact value of indenter penetration)
- Fully computerized control via USB and RS-232 serial port using DSP technology with no limitation in PC type and model
- Powerful software (JADOO), Windows OS to carry out compression, creep, cyclic, and step tests, and give complete test report with no limitation
- The whole test procedure is automatic
- Light enough to be transported and installed on huge and heavy objects
- Easy and automatic operation
- High repeatability
STM-M1 can carry out controlled compression tests with hardware and software capabilities of tensile test. Based on measuring the compression force and indentation, Brinell hardness testing can be measured. It has servo mechanical operating mechanism with advanced control and specialized software (with different control methods); load cell measures the load precisely. Measurement precision is better than 0.5%, displacement is measured by the extensometer attached to the indenter tip. The machine can be installed on the work piece and measure the hardness and indentation. In addition to compression tests, STM-M1 can carry out other tests such as different control tests as well as cyclic and creep tests and force-displacement graph can be drawn online. One can analyze any point on the graph with no limitations. The following graphs can be drawn as well:
•Force-extension
•Force-time
•Time-extension
•Elongation-time
This portable machine is intended to measure metal hardness with Brinell methods in huge and heavy objects, which cannot be tested by ordinary machines. It is widely used in different fields such as R&D, quality control.
You must be logged in to post a review.
قبل از ادامه دادن، مطمئن شوید که نام محصول را کپی کردهاید
برای دسترسی به این فرم لازم است به حساب کاربری خود در سایت سنتام وارد شوید
سازنده:
شرکت طراحی مهندسی سنتام
استعلام قیمت
درخواست مشاوره
دانلود کاتالوگ
شرایط تحویل حضوری
شرایط تحویل کالا در محل کارخانه
جزییات بیشتر
شرایط ارسال دستگاه
شرایط ارسال دستگاه و حمل آن
جزییات بیشتر
متن آزمایشی
متن آزمایشی
جزییات بیشتر
گارانتی دستگاه
شرایط خدمات پس از فروش
جزییات بیشتر
جزییات بیشتر
- Design as per ASTM A370, E8M standards
- Machine efficiency as per ASTM E10 standard
- Servo mechanical operating mechanism with high precision ball screw and load cell
- Capability of selecting type of test such as compression, cyclic, step, and creep tests
- Load application capacity, 100Kgf, accuracy class 0.5
- Brinell indenter can be tested for hardness test
- Equipped with digital non-contact magnetic extensometer (to read the exact value of indenter penetration)
- Fully computerized control via USB and RS-232 serial port using DSP technology with no limitation in PC type and model
- Powerful software (JADOO), Windows OS to carry out compression, creep, cyclic, and step tests, and give complete test report with no limitation
- The whole test procedure is automatic
- Light enough to be transported and installed on huge and heavy objects
- Easy and automatic operation
- High repeatability
STM-M1 can carry out controlled compression tests with hardware and software capabilities of tensile test. Based on measuring the compression force and indentation, Brinell hardness testing can be measured. It has servo mechanical operating mechanism with advanced control and specialized software (with different control methods); load cell measures the load precisely. Measurement precision is better than 0.5%, displacement is measured by the extensometer attached to the indenter tip. The machine can be installed on the work piece and measure the hardness and indentation. In addition to compression tests, STM-M1 can carry out other tests such as different control tests as well as cyclic and creep tests and force-displacement graph can be drawn online. One can analyze any point on the graph with no limitations. The following graphs can be drawn as well:
•Force-extension
•Force-time
•Time-extension
•Elongation-time
Reviews
There are no reviews yet.