بازدیدکننده گرامی این صفحه در حال بروزرسانی و بازطراحی میباشد لذا ممکن است در حال حاضر برخی از مطالب قابل رویت نباشند
- In accordance with ISO 868-7619 / ASTM D 2240 / DIN 53505 standards
- Manual mechanism to adjust the shore durometer (Clamping up to 200 mm with standard dial)
- Using linear bushing to decrease friction during loading
- Applying the loading stroke up to 15mm by means of loading handle
- Two standard weights to use in Shore A (1kg) and Shore D (5kg)
- Safety guard with mechanical adjustment to protect shore durometer preventing it from contact with the ground
- Proper support bolt to install different durometers
- Full perpendicularity of durometer support to the bracket
In hardness test, according to the standard, the standard force (e.g. weights (5kg) for the Shore D) is applied by both loading handle and frictionless mechanism to the indenter to penetrate into the sample; then the rubber surface hardness is obtained by shore durometer. A protective shield is installed for safety to prevent the indenter from any contact with the metal bracket or other potential damages.
This test is used to measure rubber and plastic hardness thus it is of importance as a one of the QC steps.
You must be logged in to post a review.
قبل از ادامه دادن، مطمئن شوید که نام محصول را کپی کردهاید
برای دسترسی به این فرم لازم است به حساب کاربری خود در سایت سنتام وارد شوید
سازنده:
شرکت طراحی مهندسی سنتام
استعلام قیمت
درخواست مشاوره
دانلود کاتالوگ
شرایط تحویل حضوری
شرایط تحویل کالا در محل کارخانه
جزییات بیشتر
شرایط ارسال دستگاه
شرایط ارسال دستگاه و حمل آن
جزییات بیشتر
متن آزمایشی
متن آزمایشی
جزییات بیشتر
گارانتی دستگاه
شرایط خدمات پس از فروش
جزییات بیشتر
جزییات بیشتر
- In accordance with ISO 868-7619 / ASTM D 2240 / DIN 53505 standards
- Manual mechanism to adjust the shore durometer (Clamping up to 200 mm with standard dial)
- Using linear bushing to decrease friction during loading
- Applying the loading stroke up to 15mm by means of loading handle
- Two standard weights to use in Shore A (1kg) and Shore D (5kg)
- Safety guard with mechanical adjustment to protect shore durometer preventing it from contact with the ground
- Proper support bolt to install different durometers
- Full perpendicularity of durometer support to the bracket
In hardness test, according to the standard, the standard force (e.g. weights (5kg) for the Shore D) is applied by both loading handle and frictionless mechanism to the indenter to penetrate into the sample; then the rubber surface hardness is obtained by shore durometer. A protective shield is installed for safety to prevent the indenter from any contact with the metal bracket or other potential damages.
Reviews
There are no reviews yet.